3M Scotchcal Reflective Striping Tape, Black, .5-Inch by 50-Foot
3M Scotchlite Reflective Striping Tape is a reflective film which is intended to provide light reflective properties in darkness. Safety and nighttime visibility may be improved with the 3M Scotchlite Reflective Series Film 680 product. Primary uses include commercial vehicle, railroad and bus graphics; sign graphics; and striping (great for motorcycle helmets). The black film, which reflects whitish/tan at night when hit by light, has a typical coefficient of retroreflection of 30. Meets NFPA requirements. Please note 3M just refers to the product as Scotchcal Striping Tape on the retail packaging; however the tape is reflective striping tape and the specific product number should also be on the packaging: 79902 - 1/4 inch wide black ; 79905 - 1/4 inch wide blue ; 79903 - 1/4 inch wide gold ; 79907 - 1/4 inch wide orange ; 79904 - 1/4 inch wide red ; 79901 - 1/4 inch wide silver / white ; 79908 - 1/4 inch wide yellow ; 79922 - 1/2 inch wide black ; 79942 - 1 inch wide black .
See All PLX18 Circular Acrylic Indoor Convex Security Mirror, 18" Diameter (Pack of 1)
Manufacturer: See All Industries, Inc.
The See All PLX18 circular acrylic indoor convex security mirror is a circular, convex, acrylic mirror, with an 18" diameter, that reflects a wide angle image at a diminished size to extend a field of view to help a person see around obstacles for safety, or monitor a wide area for efficient surveillance. Acrylic is shatter resistant, weighs less than glass, and reflects a clear, bright image. The mirror comes with a swivel mounting bracket that makes it adjustable to a wide range of angles. The 18" diameter size is suitable for areas up to 15' away from the mirror (diameter is measured from the outside of the 3/4" rim). This mirror has a tempered hardboard backing for good strength-to-weight ratio in indoor applications. Tempered hardboard is a high-density fiberboard that has been coated with linseed oil and then baked to increase its water resistance, rigidity, and tensile strength. Safety mirrors are used to help increase visibility in a variety of locations; for example, in hallway intersections and sharp turns, and in driveways and loading docks where drivers have to back up or enter traffic. Safety mirrors are sometimes called security mirrors, and they can be used to extend the view of security personnel, or to help monitor factory workers and automated processes to improve quality control and productivity. For convex mirrors, objects will appear to be further away than they are, and will be easier to see in a larger mirror. Depending on visibility conditions and the viewer's eyesight, objects will usually be recognizable within about 1 ft. of distance (including distance from eye to mirror, and from mirror to object) for each inch in mirror diameter. See All Industries manufactures safety and security mirrors. The company, founded in 1958, is headquartered in Chicago, IL. What's in the BoxOffset bracket Nut with washer Installation instructions
Brand: Star Micronics
TSP143U GRY. Introducing the TSP143U GRY, the first all-in-one receipt printer. Yes, all the parts and software are included in one box. To get you setup quickly, we've included an internal power supply, interface cable, power cable, complete mounting kits and a paper roll. To bring you the future of receipt printing now, we're also including a full set of software utilities. Redesign your receipt without modifying your application. Add your logo. Add coupons. Preview receipts and enhance bar codes. Included operating system drivers allow for 'Plug and Play' automatic installation. But setup is not the only fast part. The TSP143U GRY is a fast printer. It's the All-In-One-Box Miracle coupling amazing features and high reliability at an affordable price.
Zebra LP2844 2844-20301-0024 USB Serial Parallel Barcode Printer W/New Adapter, USB, Power Cable
Brand: Zebra Technologies
Zebra LP2844 Thermal Label Printer is the classic that continues to be as popular today as it ever was. The printer doesn't use ink so you never run out. The LP 2844 is a solid printer that prints 10's of thousands of labels before needing any attention and why more major corporations have chosen it than any other thermal printer.
Motorcycle Reflective Safety Tape - Black Adhesive. RTK-03A
Motorcycle Reflective Safety Tape - Black Adhesive This black glossy adhesive motorcycle safety tape blends in with black surfaces during the day and shines a bright white reflection at night. The reflective tape kit includes 24 inches of 1" wide, 24 inches of 2" wide, and 12 inches of 4" wide black reflective motorcycle tape. The tape kit can be cut into strips, special shapes, or pinstripes, and easily applied to motorcycle surfaces, helmets, leather, boot heels, and even saddlebags to make you visible to oncoming or following headlights. The self-adhesive strips bond exceptionally well to any smooth, clean, dry surface. Be seen, Be safe! How This Material Reflects Light
Color: Dark during the Day, White at Night
Motorcycle Reflective Safety Tape - Black Sew-On Stealthy Satin Black during the day blends with dark clothing, but turns bright, for visibility and safety at night.This kit contains 48 inches of 1" wide, 48 inches of 2" wide, and 24 inches of 4" wide Black Reflective Fabric. In all, 240 square inches of bright nighttime visibility. Material is a blend of 35% cotton, and 65% polyester. It's soft, washable, easy manageable in cutting, slitting and sewing. It can easily be cut into strips or pieces, any shape, and sewn to shirts, jeans, jackets, and even leather.This tape is machine washable up to 105ÂºF (warm) and can be machine dried, however, to maximize its life, we recommend washing on gentle cycle and use of a low temperature dryer setting, or line drying. Be Seen, Be Safe!How This Material Reflects LightAmanet Reflective Tapes and Stickers contain a layer of microscopic lenses coated onto the surface. An auto's lights hit this and the bright light will shine back to the driver's eyes, making you visible from a very long distance away. The best way to test this at home is to put the reflective material at approximately 20 feet away, flat against a wall, at eye level, directly in front of the sticker or tape. For testing once installed, put the headlights of an auto at approximately 200 to 300 feet directly behind the bike, on a level road. At just 10 feet away you won't see the brightest reflection because the angle of the headlight-reflector-eye is too large (See the illustration). In the real world 10 to 20 feet away is too close for a car to first notice you and stop. The reflective tape or sticker is designed so an auto can see you and your bike hundreds of feet away.
Alfalfa seeds for sprouting. High germination rate and easy to grow and sprout. Alfalfa sprouts the cornerstone of sprouting and are rich in vitamins, amino acids, minerals and protein. Resealable packaging, small quantity to bulk.Certified Organic.Organic alfalfa seeds are a staple for sprouting. They are fun, fast, easy growers and are delicious and nutritious. They yield approximately 7 times the weight of seed in sprouts, so a pound of alfalfa sprout seeds will produce over seven pounds of delicious sprouts.
JVCC NS-2A Premium Non-Skid Tape is a premium 32 mil 60 grit silicone carbide high traction, anti-slip tape. This non-skid tape has a waterproof backing and is coated with an aggressive acrylic adhesive (more permanent than a synthetic rubber adhesive). JVCC Non-Skid Tape is used indoors or out on stairs, pool areas, ramps, work areas, skateboards and garage steps. The 60 grit silicone carbide surface is similar in feel to 60 grit sandpaper therefore it is not appropriate for bare feet. NS-2A complies with OSHA 1910.263(3). Also please note the semi-transparent/translucent color is only partially transparent while the white color is completely opaque. For bare feet please see a rubberized non-skid tape like the ISC 3500 Jessup Safety Track. JVCC NS-2A is not coated with an adhesive that can be submerged or put underwater. So if when applied there is any gaping which would allow water to seep underneath to the underside of the tape water would degrade the adhesive pretty quickly. Also the substrate it is applied to must be dry, in good condition, and free of any debris when the tape is applied so the adhesive bond can form correctly. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 50mm wide. In the photo the colors are the following (starting from the leftmost column and working down): Fluorescent Orange, Fluorescent Yellow, Yellow with Black stripes, Orange, Yellow, Black, Red, Grey, White, Blue, Green, Clear/Translucent.